Pelco Is20-Chv10s Uživatelský manuál

INSTALLATIONC3472M-C (9/10)IS20/IS21 Series Camclosure® 2Integrated Camera SystemColor and Day/Night ModelsFlush Mount, Surface Mount

10 C3472M-C (9/10)~íDip Switch: Selects ON/OFF of white balance, backlight compensation, Adaptive Black Stretch or day/night mode.Figure 2. Default Di

C3472M-C (9/10) 11InstallationThe following installation should be performed by qualified service personnel or system installers.NOTES:• Procure 4 mou

12 C3472M-C (9/10)b. Adjust the marker on this unit to “I” on the top cover, and turn the top cover counterclockwise to remove it (refer to Figure 5).

C3472M-C (9/10) 13MOUNTING THE CAMERAThe mounting requirements are shown as follows:*Make sure that the installed mount bracket can support more than

14 C3472M-C (9/10)SURFACE MOUNTING 1. Prepare the mounting space.• If the camera is directly mounted on a wall/ceiling, align the camera mounting posi

C3472M-C (9/10) 153. Attach the ceiling mount bracket onto the ceiling board (refer Figure 8).NOTE: Maximum thickness of the ceiling board is 30 mm (

16 C3472M-C (9/10)WIRINGFigure 9. Video Output Connector and Power CableVIDEO OUTPUT CONNECTIONNOTE: When connecting the coaxial cable to the video ou

C3472M-C (9/10) 17POWER CONNECTIONConnect the 3-conductor cable of the camera to the power supply.Figure 10. Power CableTable B. Power Wire Colors and

18 C3472M-C (9/10)CABLE LENGTH AND WIRE GAUGE24 V ACThe voltage supplied to the power terminals of the camera should be within 19.5 V AC and 28 V AC.1

C3472M-C (9/10) 19IMAGE ADJUSTMENT PAN, TILT, AND AZIMUTH ADJUSTMENT1. Rotate the panning table (320-degree range) to adjust the panning position of

2 C3472M-C (9/10)ContentsContents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20 C3472M-C (9/10)3. Rotate the tilting table (±75-degree range) to adjust the tilting position of the camera (refer to Figure 12).NOTES:• This lens c

C3472M-C (9/10) 21ZOOM AND FOCUS ADJUSTMENT1. Loosen the zoom lock lever and move the lever between TELE and WIDE to obtain the appropriate angle of v

22 C3472M-C (9/10)ASSEMBLING THE CAMERA1. Mount the top cover (refer to Figure 15):a. Adjust the marker of this unit to “I” on the top cover to instal

C3472M-C (9/10) 23c. Turn the dome cover block to the right and left while watching the monitor. Make adjustments so that no eclipse is caused.d. Rot

24 C3472M-C (9/10)3. (Flush mount models only) Attach the supplied flush mount cover:a. Match the logos on the cover and on the main body of the camer

C3472M-C (9/10) 25SpecificationsPower Source and ConsumptionPAL 24 V, 50 Hz, 2.7 W (AC); 12 V, 220 mA (DC)NTSC 24 V, 60 Hz, 2.7 W (AC); 12 V, 220 mA (

26 C3472M-C (9/10)(Weights and dimensions indicated are approximate.)Ø 0.16-0.18(0.40-0.45)Ø 1.18-1.97(3.00-5.00)0.18 (0.45)Ø 5.10 (12.95)3.29 (8.35)1

PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material or workmansh

Pelco, Inc. Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USAUSA & Canada Tel (800) 289-9100 Fax (800) 289-9150Internatio

C3472M-C (9/10) 3Important Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5.

4 C3472M-C (9/10)UL LISTED MODELSWARNINGS• This apparatus must be earthed.• To prevent fire or electric shock hazard, do not expose this apparatus to

C3472M-C (9/10) 58. Cleaning the camera body:• Turn the power off when cleaning the product. Use a dry cloth to clean the product.• Do not use strong

6 C3472M-C (9/10)We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or ot

C3472M-C (9/10) 7Limitation of LiabilityTHIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NO

8 C3472M-C (9/10)DescriptionThe IS20/IS21 Series Camclosure® 2 camera system integrates a camera and lens package into a small versatile indoor enclos

C3472M-C (9/10) 9Product Overview(Day/night model shown)Figure 1. Product Overview of IS20-DN CameraìVideo Output Connector: Transmits composite video