Pelco C2406M-F Uživatelský manuál

200 Series Camclosure®Integrated Camera SystemC2406M-F (4/04)®INSTALLATION/OPERATION

10 C2406M-F (4/04)SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITHOUT AUTO IRISRefer to Figure 16. The switch is located next to the lens. Automatic b

C2406M-F (4/04) 11SWITCH SETTINGS FOR VARIFOCAL LENSThe high resolution camerawith varifocal lens andauto iris is configured atthe factory for optimal

12 C2406M-F (4/04)(Design and product specifications subject to change without notice.)SPECIFICATIONSGeneralPan/Tilt Adjustment: Manual; ±10° pan; 5°

C2406M-F (4/04) 13REGULATORY NOTICESFCC Class A (monochrome, EIA cameras only)This equipment has been tested and found to comply with the limits of a

14 C2406M-F (4/04)WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material or

C2406M-F (4/04) 15REVISION HISTORYManual # Date CommentsC2406M 11/99 Original version. 1/00 Revised installation instructions. Added FCC notices.C240

World Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax: 1-5

2 C2406M-F (4/04)IMPORTANT SAFEGUARDS AND WARNINGS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instruction

C2406M-F (4/04) 3DESCRIPTIONThe wedge style 200 Series Camclosure® integrated camera system is designed to mount directlyto a wall or ceiling. It also

4 C2406M-F (4/04)INSTALLATIONThe following parts are supplied:1 Camclosure integrated camera system1Watertight mounting plate1 1/8-inch pin-in-hex All

C2406M-F (4/04) 5INSTALL BASEWITHOUT CONDUIT1. Outdoor Installation Only – Bring the power and video wiring for the camera through thewiring hole in t

6 C2406M-F (4/04)bottom of the base (refer to Figure 5). Pull thewiring inside the base.WARNING: Be careful not to damagethe wiring or the connection

C2406M-F (4/04) 7REINSTALL CAMERA MODULE1. Reinstall the camera module. Refer to Figure 8. Make sure the top of the camera is orientedproperly. On the

8 C2406M-F (4/04)ADJUSTMENTS (COLOR CAMERA ONLY)If you have a color camera, it is set up at the factory and normally requires no adjustments.Sometimes

C2406M-F (4/04) 9FOCUS ADJUSTMENT FOR FIXED FOCAL LENGTH LENS WITH AUTO IRISTo adjust the focus, do the following:1. Loosen the locking screw on the b