Pelco DX7000 Uživatelský manuál

DX7000 SeriesDigital Video RecorderC665M-C (5/03)®OPERATION/PROGRAMMING

10 C665M-C (5/03) COLOR SETUPIf required, use this screen to adjust the contrast, brightness, and color level settings of a scene.Figure 3. Color Set

C665M-C (5/03) 114 RED Slider Bar – Drag the cursor on the RED bar to adjust the red color level of the viewed and recorded scene.5 GREEN Slider Bar –

12 C665M-C (5/03) SCHEDULE SETUPThe default recording schedule for the DX7000 is to continuously record all enabled cameras twenty-four hours a day, s

C665M-C (5/03) 133 END TIME - Program the time to stop recording. If you want GROUP 1 to stop recording at 5:30 in the evening, use thearrow keys and

14 C665M-C (5/03)HOW TO SET A SCHEDULEExample:Record 4 cameras with motion detection from Monday to Friday, 8:00 AM - 6:00 PM; Saturday 8:00 AM - 2:00

C665M-C (5/03) 15Step 5 – Select GROUP 02 and set the START TIMEto 8:00 and END TIME to 14:00.Step 6 – Check SAT in the DAYOF WEEK section.Step 7 – Se

16 C665M-C (5/03) SPEED SETUPUse the Speed Setup window to program the recording rate for each camera and to program the pre-alarm function for motion

C665M-C (5/03) 174 IMAGE QUALITY Slider Bar – Sets the quality of the recorded image. Image quality affects storage capacity andtransmission rate. Mor

18 C665M-C (5/03)132MOTION SPEED MENUFigure 6. Motion Speed Menu1 MOTION Button– Select the MOTION button to open the motion speed menu. Use this men

C665M-C (5/03) 19132SENSOR SPEED MENUFigure 7. Sensor Speed Menu1 SENSOR Button – Select the SENSOR button to open sensor speed menu. Use this menu t

2 C665M-C (5/03)CONTENTSSection PageGETTING STARTED ...

20 C665M-C (5/03) MOTION DETECTION SETUPMotion detection recording saves hard drive space and makes it easier to search and retrieve recorded data. Us

C665M-C (5/03) 214 CLEAR ALL BLOCK Button – Deletes all motion detection area blocks for the selected camera.5 Camera View - A red box indicates an ar

22 C665M-C (5/03) PASSWORD SETUPDX7000 features four levels of password protection to prevent unauthorized changes or use of the system. The following

C665M-C (5/03) 233 Number Buttons – Use number buttons to input password.4 ENTER Button – Select to apply password to level.5 CLEAR Button – Clears pa

24 C665M-C (5/03) PAN AND TILT SETUPSet the pan and tilt protocol for the DX7000 by scrolling through the selections in the RX TYPE box.Figure 10. Pa

C665M-C (5/03) 25 QUIT TO EXPLORERThe DX7000 uses a Windows-based operating system. To set a network address, add hardware, or change clock settings,

26 C665M-C (5/03)FOR FUTUREUSEPRESETBUTTONSCAMERA01193Figure 11. PTZ MenusHOW TO OPERATE PTZTo control pan, tilt, and zoom functions and to set patte

C665M-C (5/03) 27PTZ CONTROLSTo operate pan/tilt/zoom functions on controllable systems, do the following:a. Select a camera.• Move the cursor to a ca

28 C665M-C (5/03)PATTERNSA pattern is a user-defined, viewable camera path with a definite beginning and end. The pattern can consist of any standardp

C665M-C (5/03) 29PRESET TOURSA preset tour is a programmed sequential execution of preset positions.HOW TO PROGRAM A PRESET TOURa. Click the PTZ butto

C665M-C (5/03) 3PRESETS ...

30 C665M-C (5/03)SEARCHTo search recorded data on the hard disk drive or secondary device, click the SEARCH button located in the DISPLAY mode. TheSEA

C665M-C (5/03) 315 Playback Buttons – Use to search saved data. PREVIOUS IMAGEGO TO THE FIRST IMAGERECORDED ON HDDSTOPNEXT IMAGEGO TO LAST IMAGERECORD

32 C665M-C (5/03)DATE/TIME SEARCHa Press the Camera button.b Use the arrow buttons to select the year and date to search.c Select the day to search. D

C665M-C (5/03) 33INDEX SEARCHa Click the INDEX SEARCH button.b The Index Data List appears.Select the event type (motion or sensor) to search.Enter th

34 C665M-C (5/03)HOW TO COPY TO A BACKUP DEVICETo backup data to an external device, click the COPY button located in the DISPLAY mode.NOTE: The COPY

C665M-C (5/03) 35BACKUP WINDOWFigure 17. Backup (COPY) Window1 SELECT DRIVE Box – Lists drives with files available for backup.2 STORED ITEMS Box – L

36 C665M-C (5/03)HOW TO BACKUP (COPY) TO THE CD-RW DRIVEa. From the DISPLAY mode of the DX7000, click the COPY button. The SETUP mode appears.NOTE: I

C665M-C (5/03) 37REMOTE SITE SOFTWAREDESCRIPTIONFree remote site software is included with the DX7000 to provide remote site viewing of live and recor

38 C665M-C (5/03)Figure 20. Setup Screen1 Date and Time Indicator – Displays current date and time on the local machine.2 SITE NAME Box – Enters the

C665M-C (5/03) 397 USE BEEP Selection Box and Slider Bar – Beeps when Motion is detected.8 OVERLAY MODE Box – Select NON-OVERLAY MODE if your PC video

4 C665M-C (5/03)

40 C665M-C (5/03)Figure 21. Online Mode1 Date and Time Indicator – Displays current date and time.2 SEARCH Button – Plays back and searches recording

C665M-C (5/03) 416 RELAY OUTPUT Buttons – Turn relays connected to DX7000 DVR ON/OFF.7 DOMAIN/IP ADDRESS Text Box – Displays address of domain site.8

42 C665M-C (5/03)Figure 22. PTZ ControlsDOWNCAMERARIGHTUPLEFT00949REMOTE SOFTWARE PTZ CONTROL MODETo operate pan/tilt/zoom functions on controllable

C665M-C (5/03) 43PATTERNA pattern is a user-defined, viewable camera path with a definite beginning and end. The pattern can consist of any standardpa

44 C665M-C (5/03)PRESETSA preset is a user-defined camera position using pan and tilt, zoom, and focus commands. The DX7000 Series DVR hasprogramming

C665M-C (5/03) 45Figure 23. Pattern and Preset BarsPATTERN BAR PRESET BARFOR FUTUREUSEPRESETBUTTONSCAMERA01196PRESET TOURSA preset tour is a programm

46 C665M-C (5/03)Figure 24. Search Mode1 Date and Time Indicator – Displays current date and time.2 Search Date Selection Boxes – Selects month and y

C665M-C (5/03) 477 Copy and Print Buttons – Saves a recorded image to a diskette, prints an image, or creates andsaves an AVI file to a backup storage

48 C665M-C (5/03)SELECT DATE AND TIMEa. Enter the year and month in the SEARCH DATE selection boxes. Click the up or down arrow buttons to make a sele

C665M-C (5/03) 49Figure 25. Emergency Agent WindowEmergency Agent software alerts the remote site client of any triggered alarm at the surveillance s

C665M-C (5/03) 5GETTING STARTEDYou will need to install your unit before using this manual. Refer to the installation manual supplied with theDX7000 f

50 C665M-C (5/03)HOW TO INSTALL THE EMERGENCY AGENT SOFTWAREa. Start Windows.b. Close all programs, including any anti-virus programs.c. Insert the Re

C665M-C (5/03) 51BACKUP VIEWER SOFTWAREUse the Backup Viewer software to search images stored on backup media, DAT tape, or DVD disc.HOW TO INSTALL TH

52 C665M-C (5/03)Figure 26. Backup Viewer1 Date and Time Indicator – Displays current date and time.2 Year and Month Selection Boxes – Displays the y

C665M-C (5/03) 536 EXIT Button – Exits Backup Viewer.7 Playback Buttons8 Eject Button – CDRW eject button. It appears only if DX7000CD is installed.9

54 C665M-C (5/03)bbccddeeaaBACKUP VIEWER DATE/TIME SEARCHa Press the Camera button.b Use the arrow buttons to select the year and date to search.c Sel

C665M-C (5/03) 55abBACKUP VIEWER INDEX SEARCHa Click the INDEX SEARCH button.b The Index Data List appears.Select the event type (motion or sensor) to

56 C665M-C (5/03)WATERMARK TOOLThe Watermark tool allows you to verify if an original image has been altered. The Watermarking Viewer software is avai

C665M-C (5/03) 57Figure 30. The Image Has Not Been AlteredFigure 31. The Image Has Been Altered

58 C665M-C (5/03)SPECIFICATIONSELECTRICAL/VIDEOInput Voltage: 100-240 VAC switchable, 50/60 HzSignal System: NTSC/PALCPU & RAMDX7008: Celeron®, 12

C665M-C (5/03) 59WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material orw

6 C665M-C (5/03)Figure 1. Display Mode1 Camera Name and Recording Status – The colored circle located to the right of the on-screen camera name indic

World Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax: 1-5

C665M-C (5/03) 77 COPY Button (Backup) – Click the COPY button to record to a backup device that is recommended by Pelco.NOTE: The copy button appear

8 C665M-C (5/03)SYSTEM SETUPTo set up the DX7000 Digital Video Recorder, click the SETUP button located in the DISPLAY mode. The SETUP mode appearson

C665M-C (5/03) 9Figure 2. Camera Setup Menu1 CAMERA NAME Box – To name a camera drag the cursor over the text in the CAMERA NAME box and type in the