CM9700-SER-32Port Expander INSTALLATION/OPERATION C579M-A (5/05)
10 C579M-A (5/05) Figure 5. Sercom Card Mounting Plate Removal NOTE: If the VGA card is present in PCI slot 2, remove the retaining screw and gen
C579M-A (5/05) 11 Figure 7. CM9700-ADP-120 Adapter Plate Installation 6. Reinstall the top cover and secure with mounting screws.7. Mount external
12 C579M-A (5/05) 3 SERCOM CARDS, 3 ROCKET PORT CARDS, COM 2 UNAVAILABLE (120 TOTAL PORTS) 1. Turn off all power to the CC1. Disconnect and label all
C579M-A (5/05) 13 7. Mount external hardware. Refer to Figure 1 and do the following: NOTE: This procedure is for each individual port expansion as
14 C579M-A (5/05)
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material orworkman
Worldwide Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax:
C579M-A (5/05) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C579M-A (5/05) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thi
C579M-A (5/05) 5 Installation The CM9700-SER-32 port expander assembly increases by 32 the number of available Sercom (serial communication) ports in
6 C579M-A (5/05) e. Reinstall the top cover and secure with mounting screws. Figure 2. Removing the CC1 Top Cover Figure 3. CC1 Internal Layout
C579M-A (5/05) 7 e. Connect peripherals to desired expansion ports. Refer to RP1 in Figure 4. Figure 4. Rocket Card to Expansion Port Control Assoc
8 C579M-A (5/05) 4 SERCOM CARDS, 2 ROCKET PORT CARDS, COM 2 UNAVAILABLE (96 TOTAL PORTS) 1. Turn off all power to the CC1. Disconnect and label all a
C579M-A (5/05) 9 8. Scroll down to PERIPHERAL SETTINGS, press Enter, and then do the following:a. Scroll down to ONBOARD SERIAL PORT 2.b. Change the
Komentáře k této Příručce